1KW Low frequency unipolar high voltage pulse power supply

Name

1KW Low frequency unipolar high voltage   pulse power supply

Model

CY-DJMC-1KW

Input power supply

AC220V±10%

Output

Power

1KW

Current

200mA,100mA,70mA,34mA,20mA

Voltage

5KV,10KV,15KV,30KV,50KV

Frequency

0~255hz

duty cycle

1~99%

Waveform

Square wave (customizable: trapezoidal   wave, triangle wave, sawtooth wave, sine wave, etc.)

Mode

Custom constant voltage, constant   current, constant power

Regulation precision

≤1%

Efficiency

≥90%

Power factor

cosΦ≥0.9

Power switch

DB9 pin interface

Control mode

Power panel button control

Analog signal control: TTL level, which   can control work and stop, output voltage or output current or output power,   

external open circuit protection (generally used for water flow   protection) 

Digital interface control: 485   communication

Display mode

Chinese and English Liquid Crystal   Display

Insulation grade

Grade B

IP Grade

IP20

Protection response time

1uS

Input

Resistance to shell

≥20MΩ

Output

Withstanding voltage of input to shell

2000V/1min

Withstanding voltage of input to output

3500V/1min

Environment

temperature

-35～+45℃

Humidity

≤85%

Cooling mode

Air cooling

Overall dimension

400*95*370（mm ）

Notes

Factory default is analog interface and   485 interface

The output is a unipolar DC pulse voltage   with a waveform in one direction. Outputs a waveform with positive or   negative polarity

Customization of other parameters is   accepted

Fault prompts

Intelligent fault detection and analysis,   upper limit fault alarm, multi-level error reporting sequence for parameter   

setting errors, human operation errors, and internal factors of the power   supply.